BOATsmart! USA Knowledge Base

Some additional considerations should be taken if you’re fueling a PWC:

STEP 1: Shut down the engine.

STEP 2: Ask your passengers to exit the PWC and to wait on shore.

STEP 3: Extinguish any open flames, including cigarettes.

STEP 4: Visually check the gas separator for the presence of water and remove any traces of water before refueling.

STEP 5: Ensure the fuel selector switch is turned to the ‘OFF’ position.

STEP 6: If your PWC requires mixed gasoline, always pre-mix the gas and oil in an approved portable container before refueling your PWC.

STEP 7: If your PWC is equipped with an oil injection system, ensure the oil tank is filled with the correct oil for your PWC.

STEP 8: Fill the tank.

STEP 9: Tighten the fuel filler cap and check for fuel odors.

STEP 10: Turn the fuel selector switch to the ‘ON’ position and restart the engine.